There are several factors to be considered after purchasing a bike. One of those factors is Fuel efficiency. Fuel efficiency depends upon many factors and it is in our hand to maintain or lower mileage of our bike. We purchase commuter bikes because we are concerned about price and economy. For example Hero passion pro is a very famous commuter bike. However, even the Hero hf deluxe price wouldn’t have affected your budget but a low mileage will definitely do. There are few suggested precautions to be followed and that will ensure you for high mileage for your commuter bike. In this post we will see the best ways to increase the fuel efficiency for your commuter bike.
Maintain the throttle for the best economy
Fuel efficiency depends a lot on how you use your bike’s throttle. If you have a habit of accelerating hard at every traffic light, your bike’s fuel efficiency is likely less than the one that pulls off with a smooth throttle. More acceleration puts more stress on the engine, consuming more fuel to generate power and produce high torque to perform properly. So it’s highly recommended to take it easy with the throttle. This practice will help you save money in the long run.
Check for tire pressure on time
We recommend you to get in the habit of checking your tire pressure every time you go to the filling station. Most of us overlook tires, but they are among the most important components of our bike. A bike that runs on lower-pressure tires tends to be less fuel efficient. Low air pressure increases the tire surface area, so the engine tends to work harder to get the boost it needs. This process leads to a reduction in mileage. In addition, never over-inflate the tires. If you do this, the overall ride quality will be bumpy.
Timely servicing
Most of us habitually take our bikes for servicing every three or six months, or it is a good habit to do this every 500 km. But several maintenance activities should be carried out regularly. For example, lubricate the chain with a suitable chain lubricant. Most commuter bikes come with chain guards, but some are equipped with exposed chains that require regular chain cleaning and lubrication.Following all these practices will help in the smooth running of your bike.
Save fuel in traffic
Everyone hates to stand in long traffic jams or at traffic lights. We usually keep the engine on while waiting at traffic lights, which wastes fuel. It’s always best to turn off the bike if the traffic light timer shows more than 30 seconds before it turns green. The same applies to situations with heavy traffic. Turn off your engine if you get stuck in traffic.
Park in the shade to avoid fuel loss From evaporation
India is a tropical country. Therefore, heat and humidity figures vary throughout the country. However, in most places, we see clear skies and direct sunlight. In such cases, This is disadvantageous for vehicles as they may lose some fuel due to evaporation. In addition to wasting energy, direct sunlight can also damage the paint. Prolonged exposure to the sun can cause peeling and flaking of the paint. Therefore, park your bike in a shaded area. Parking in the shade will not only help you avoid wasting fuel but also increase the life of your bike’s paint.
Modify without losing Performance and Mileage
The word “modified bike” usually conjures up an image of a bulky two-wheeler with fat tires and aggressive sounds. Please note that bike modifications are not limited to aesthetics, such as changing the seat and handlebars, tires or wheels. However, many non-standard components can improve or degrade your bike’s fuel economy and performance. Changing the electrical components or the engine and exhaust system of your bike can affect its mileage. Therefore, it would be best if you thought about the long-term consequences of modifying the motorcycle and decided to make changes.
Always use clean fuel
Automobile fuel adulteration has long been a serious problem in our country. Using mixed or unclean fuel can have negative consequences for your bike’s performance and the environment. Further, engine failure, component failure, safety concerns, etc., are just a few of the many problems you will encounter when using adulterated fuel. In addition, gases such as hydrocarbons (HC), carbon monoxide (CO), nitrogen oxides (NOx), particulate matter (PM), etc., are emitted from the exhaust pipe when unclean fuel burns. Therefore, fuel adulteration has a big contribution to air pollution.
The solution is only to buy fuel from a reliable filling station. Ask around for petrol pumps that sell clean fuel. Try their fuel for some time and then decide if you want to keep buying at the same station when refuelling is required. Avoid buying fuel from multiple locations.
Avoid aggressive and rash riding
To get the best fuel efficiency, you must ride your bike defensively. This can be achieved by driving at an average speed of 40 to 55 km per hour. Further, avoid frequent braking, hard acceleration, etc. Hard acceleration results in high fuel consumption. You may face many challenges while riding, but stay calm in critical situations. It is recommended that avoiding speeding your bike unnecessarily and driving safely will also be helpful in terms of traffic compliance.
Wrapping up the discussion
A bike has a life of 15 years if it is maintained properly. The performance and mileage are two important factors that should be considered for every rider. Since you can do all these maintenance at your home, you should follow these points for the good health of your bike.