Simple Instructions to Perform Rockspace Wireless Range Extender Setup

Maria James February 3, 2023 Tech Leave a comment 141 Views

Are you looking for the perfect solution to gain access to a blazing-fast and seamless internet connection in every nook and cranny of your house? Well, in that case, you should definitely opt for a Rockspace wireless range extender. With this networking device, you will not just be able to access a fast internet connection but you will also get the privilege to make as many devices as you want to access its network without a lessened speed.

In order to get your hands on these advantages, you need to set up the Rockspace extender. You can do so by following the Rockspace WiFi extender setup instructions outlined in this article. Here, we’ve explained two methods through which the process can be taken forward. Thus, without wasting any more time, let us get the ball rolling.

Setup Rockspace Wireless Range Extender via WPS Method

Also known as the push button method, the WPS method is the easiest way to configure the Rockspace wireless range extender. You can follow the instructions outlined in this section in order to execute the process using the WPS method:

Locate an electrical wall socket in your house.
Once found, plug your Rockspace extender into it.
You can do so either via an adapter or power cable.
Press the power button and let the LED become solid.
After that, look for the WPS button on the extender.
Whenever you find it, press it carefully.
Hold on for a couple of seconds.
After that, you need to locate the WPS button on the host device and press it as well.
Now, you need to wait again.
At last, unplug your device and plug it somewhere else.

In this manner, you will be able to wrap up the Rockspace extender setup process using the WPS or push button method.

For your information, if you are not using a WPS-enabled router, then you will not be able to use the WPS method for the setup process. Thus, ensure that the host router is WPS-enabled.

Setup Rockspace Wireless Range Extender via Manual Method

Another way through which you can perform Rockspace extender is by making your way to the web user interface of the device. You can do so by referring to the guidelines given here:

First of all, physically supply power to your Rockspace extender.
You can refer to the first three steps discussed in the previous method for the same.
After that, link the networking devices.
Open up an internet browser on your system and access re.rockspace.local.
You will soon find yourself on the official login page of your Rockspace range extender.
There you ought to fill in the default admin login details.
You can refer to the ones highlighted in the user manual for that.
Click on the Log In button.
You will reach the Rockspace extender setup wizard.
Can you see some instructions on your screen? Go through them.

And you are done. With that, you will successfully be able to put an end to the Rockspace WiFi extender setup wizard using the http re rockspace local web address.

Now, give all the devices in your house access to the network of the Rockspace wireless range extender and enjoy a blazing-fast internet connection.

The Conclusion

As mentioned in the introduction of this article, performing Rockspace extender setup is very important if you want to access a super-fast internet connection. Hopefully, you will be able to do so by following the guidelines mentioned above.

What do you think of this write-up? Was it worth investing your time in? Is that a yes? Well then, we are glad that we could be of some help. Read more.